Installing a Brick Paver Walkway or Brick Tile Accessories

The usage of Bricks or Pavers to produce a walkway or patio area matches a home in a method that is unrivaled. In addition, installing a Brick or Paver sidewalk does not necessarily need a pro.

The secret to setting up a Brick or Paver Walkway is to very first effectively prepare the area where the bricks/pavers are to be installed. In addition, string lines ought to be strung on each side of the pathway.
When the location has been dug down, 3/4" gravel stone must be laid in and tamped down tightly. The height between the tamped down sand and the stringline need to equal the density of the brick or paver.

Now that you have a stable base, place a 1" pipeline or ledger board the length of the walkway on either side of the pathway. Then using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will develop a level surface location to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the prepared location. These strips will act as your pathway border and aid to preserve the integrity and shape of the common bricks walkway.

You can then begin to lay the bricks/pavers when this is done. There are numerous patterns you can lay. I especially like the Herring Bone pattern. The secret to laying the bricks/pavers is to make sure that read more they interlock with each other. Constantly stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will once again help keep the stability of the pathway.

Inevitably bricks/pavers will require to be cut or split when constructing the pathway. To in fact cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the spot where you desire to break the brick. If your walkway has curves you will require to buy/rent a wetsaw.

After installing the bricks, construct up the outside edges with extra sand, and then shovel in the topsoil and pack down strongly.
Spread stone dust over the brand-new pathway and sweep into the cracks. This will complete the interlocking of the bricks and assist to eliminate any weed growth.


In addition, setting up a Brick or Paver pathway does not necessarily need a pro. The secret to setting up a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be set up. Now that you have a steady base, position a 1" pipeline or journal board the length of the sidewalk on either side of the pathway. These strips will act as your sidewalk border and help to maintain the integrity and shape of the pathway. Undoubtedly bricks/pavers will require to be cut or divided when constructing the walkway.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Installing a Brick Paver Walkway or Brick Tile Accessories”

Leave a Reply

Gravatar